303 deaths may be linked to GM ignition recall [UPDATE]

Filed under: , , ,

GM Recall Saturn Ion

This issue could surpass the 27 Ford Pinto fire deaths and the 271 fatalities blamed on the Ford Explorer/Firestone debacle

The General Motors ignition switch recall appears to be rapidly spiraling out of control. A new report analyzing federal crash data suggests that there weren’t only 12 or 13 people killed after their GM vehicle’s ignition inadvertently switched off, disabling the airbags. No, the new figure could be 303. And that’s just on two of the six recalled models, the Chevrolet Cobalt and Saturn Ion, so the figure could grow.

The review of the crash data was done by Friedman Research Corporation, which looked at airbag failures in GM vehicles between 2003 and 2012 (despite reports of issues back in 2001). According to The New York Times, the review only looked at cases where the airbags failed to deploy – it didn’t analyze the actual causes of the crashes.

Still, it’s a troubling development, which if proven correct would mean this latest safety issue easily surpasses the 27 deaths attributed to Ford Pinto fires and the estimated 271 fatalities blamed on the Ford Explorer/Firestone tire debacle.

Meanwhile, Automotive News reports on trial lawyers smelling blood in the water. Litigators are looking to line up clients that have been affected by the recall, with one lawyer even saying he was planning to challenge post-bankruptcy GM’s immunity to issues that happened before a federal bailout.

"If you are aware of potential exposure to litigation and you don’t reveal it, that’s fraud," said Bob Hilliard, a Texas-based lawyer representing the families of a pair of Wisconsin teens killed in a Cobalt crash in 2006. "I’m going to go back to that bankruptcy judge and say, ‘You have to undo this, the liability of old GM, because it was the new GM’s continued coverup after the bankruptcy that allowed people to be hurt or killed.’"

Automotive News spoke to Chip Bowles, a bankruptcy lawyer, about Hilliard’s attempt to reopen the case and remove new GM’s immunity. Bowles told the site Hilliard would need to prove that old GM willingly deceived US Bankruptcy Judge Robert Gerber.

Actually doing that, though, may prove very difficult, with Bowles adding, "Lots of luck there, friend."

UPDATE: There is concern that the study citing 303 attributable deaths may not represent an accurate calculation, because its findings were reportedly based in part on a database that does not discern between accidents in which the airbags were supposed to deploy and accidents in which they were not. We have a followup story with details on the growing controversy here.

303 deaths may be linked to GM ignition recall [UPDATE] originally appeared on Autoblog on Fri, 14 Mar 2014 12:45:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

from Autoblog http://ift.tt/1m47dLU

Local Motors will 3D print an EV live in Chicago in September

Filed under: ,

Local Motors Rally Fighter

We’ve heard of EV kit cars that can take a week (or an hour) to build, but how long do you think it would take to build an EV from scratch, using this new-fangled 3D-printing technology? If the technology from Local Motors works as advertised, it should take no more than the five days. The public will get to see for ourselves during this year’s International Manufacturing Technology Show in Chicago, IL in September. Two years ago, at the 2012 International Manufacturing Technology Show, Local Motors built its Rally Fighter (pictured) on the grounds during the six-day event.

So runs the plan, anyway, and Local Motors says it will create the "direct digital manufactured vehicle" based on the plans created by the company’s "global community." Some of the advanced manufacturing techniques came from the Manufacturing Demonstration Facility at the Oak Ridge National Laboratory, and once any kinks have been worked out, the plans could be fairly easily adapted to make EVs that work exactly right for local conditions.

The people involved are not afraid to hype up the possibilities of a 3D-printed. Or even overhype them. Bonnie Gurney, the director of communications for AMT, said in a prepared statement that, "Local Motors is undeniably the first disruptive entrant into the US automotive industry in decades." Tesla fans would likely disagree, but the idea of a 3D-printed car would certainly be something fresh and interesting. Scroll down for a press release.

Continue reading Local Motors will 3D print an EV live in Chicago in September

Local Motors will 3D print an EV live in Chicago in September originally appeared on Autoblog Green on Sun, 16 Mar 2014 17:20:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

from Autoblog http://ift.tt/1dbW1Vz